EDAC Connectors
40 Tiffield Road
Scarborough, ON MIV 5B6
Canada
Phone: 416-754-3322
Fax: 416-754-3299
Email: EDAC@MAPLENET
Edac, Inc. manufacturers a complete range of card edge connectors, including .050", 1 00", .1 50", .1 56" & .200" spacing. A variety of row s@acing are available for each of the above. Edac otter all industry standard products such as ISA, PCI & EISA, & thousands of variations to meet almost any specific requirement. Most products are also avaiiable as press fit versions with compliant pin contacts. Most varieties are also available as high temperature versions for burn-in oven applications. One of the most comprehensive lines of D-subminiature connectors offered anywhere is also available. This includes not only the most popular industry standard .175", .318", .350", .370" & .590" foot prints, but also harder to find configurations, such as vertical mount, dual port, machined pin, ferrite filtered, high-temperature & many others. Edac Inc. also manufactures a complete line of 516 rack & panel connectors widely used in the audio, entertainment & process control industries. The line is completed with a variety of metal-to-metal twopiece connectors & several special products for both the telecom & test industries.

Electronic Precision Technology
149A California St.
Newton, MA 02158
Phone: 617-928-3400
Fax: 617-928-0840
DIN41612 connectors in press fit, through-hole & SMT,, press fit tooling; VLSI sockets; PGA extractors & inserters; pin alignment tools, PCB racks; the Maestro PCB cutter, the FS-100 computerized cutting machine: automatic daisy chaining connectors; D-SUB connectors; M-series connectors.

Elite Technical Inc.
Corporate and Sales Office
Suite 240, 2333-18th Ave N.E.
Calgary, Alberta
T2E 8T6
Tel: (403) 250-8087
Fax: (403) 291-9671
E-Mail: nfrost@etechi.com
Elite Technical Inc. is a Canadian manufacturer and supplier of high quality, high reliability interconnections and connection services to a range of industries.
We offer power, data, RF and mixed-mode cables, as well as custom builds and over-molding at competitive prices.
Our design and engineering services complement our product lines.

ELMA Electronics
44350 Grimmer Blvd.
Fremont, CA 94538
Phone: 510-656-3400
Fax: 510-656-3783
E-mail sales@elma.com
Switches, LEDs, Knobs, Backplanes, Power Supply Units, and Extender/Extension Boards.

E-Mark, Inc.
E-Mark, Inc.
273 Canal Street, Suite 414
Shelton, CT 06484 USA
Phone: (203) 922-1182 or (800) 831-5383
Fax (203) 922-8231
"Value in Interconnect Solutions"
E-Mail: sales@e-markinc.com

ESCO-Insulectro
2060 East Francis
Ontario, CA 91761
Canada
Phone: 909-947-4060
Fax: 909-930-0658
In 1997, ESCO-Insulectro will connect with CUSTOMERS through a JIT III (sm) partnership that delivers the highest quality wire, cable, and interconnect products in the industry on time, every time, and at the lowest total cost, with Total Materials Management, ON-SITE Inventory Management, TQM/SPC procedures.
ESCO-Insulectro, another "World Class Connection" with December 96's ISO9002 certification.

FOCI Fiber Optic Communications, Inc.
No. 18, Prosperity Rd. II, Science-Based Industrial Park
Hsinchu, Taiwan 300
R.O.C.
Phone: 886-3-5770099
Fax: 886-3-5799766
E-mail: 842003@mailsrv.foci.com.tw
Fiber Optic Passive Components:

Foranne Mfg. Inc.
83 Stream Whistle Dr.
Ivyland, PA 18974
Phone: 215-357-4650
Fax: 215-357-4631
EMI/RFI Protection Connectors, Backshells, Cable Connectors, Conduit Connectors.

FCI (Framatome Connectors International)
Tour Framatome
La Défense 6
92084 Paris La Défense
France
Headers, sockets, plugs, receptacles, card edge connectors, ball grid array, memory module (SIMM, DIMM),card readers, PC card connectors, high density and miniature connectors, IDC ribbon cable and discrete wire, wire to board, flex cable and flex circuit connectors (FFC, FPC, FRC, CIC), board to board and backplane connector systems including DIN 41612 and 2 mm hard metric interconnect systems, power connectors, modular jacks, circular and rectangular I/O connectors, harnesses and cable assemblies, D subminiature, fiber optic contacts, push pull, military, cylindrical, watertight, filter (EMI/RFI), shielded, non-magnetic and hermetic connectors, bus bars, terminals, splices, accessories, copper and aluminum substation and grounding connectors, lugs, taps, spacer dampers and other connectors for power distribution, mechanical and hydraulic crimping and application tooling.

Fujipoly America Corp
365 Carnegie Ave.
Kenilworth, NJ 07033
Phone: 908-298-3850
Fax: 908-298-1232
E-Mail: fujipoly@aol.com
ZEBRA® Elastomeric Electronic Connectors are a comprehensive group of high performance interconnect devices with applications throughout the entire field of electronics.
* Fujipoly EFI / EMI Sheilding and ESD Grounding Silicone RubberProducts.
* SARCON® Thermal Insulation and Adhesives: An advanced silicone rubber with high thermal conductivity and superior flame-retardancy

HH Smith Inc
632 Arch Street
Meadville, PA 16335
Phone: 814-724-6440
Fax: 814-333-1912
E-mail: ntt@toolcity.net
Electronic Hardware, coaxial connectors cable assemblies.

HARWIN
E-mail: mis@harwin.com
Header, sockets, terminal blocks, military connectors, rf connectors.

HARTING, Inc.
of North America
1370 Bowes Road
Elgin, IL 60123
Phone: 847-741-1500
Fax: 847-741-8257
Din,D-Subs,Header,Metric,USB,and SCA-2.

Ho Chien Electronic Group, Inc.
Interconnect Division
260 W. Arrow Hwy, Unit#B
San Dimas, CA 91773
Phone: 909-599-4955
Fax: 909-599-5488
Email: hochien@hochien.com
Broad range of interconnect from D-Subs to sockets; PCB type to cable.  Specialty in machine pin contacts.  ISO-9002 certified.

Hypertronics Corp.
16 Brent Dr.
Hudson, MA 01749
Phone: 978-568-0451
Fax: 978-568-0680
Low Insertion Force connectors for computer, medical, military, test equipment & process test & burn-in equipment. Quick, disconnect cable connectors with up to 1,000 contacts & power/signal combinations with up to 50 amp contacts will be featured. Models from a new .075" centerline printed circuit board connector family with surface mount & through hole termination.